X-NUCLEO-OUT08A1

Industrial digital output expansion board for STM32 Nucleo provides a powerful and flexible evaluation and development environment for 2A (typ) digital output modules, featuring the safe driving and smart diagnostic capabilities of the IPS160HF single high-side switch. The X-NUCLEO-OUT08A1 interfaces with the microcontroller on the STM32 Nucleo via 3KV optocouplers driven by GPIO pins and Arduino™ UNO R3 (default configuration) and ST morpho (optional, not mounted) connectors. The expansion board should be connected to either a NUCLEO-F401RE or NUCLEO-G431RB development board and can also be stacked with another XNUCLEO-OUT08A1 or X-NUCLEO-OUT10A1. Two X-NUCLEO-OUT08A1 expansion boards allows you to evaluate a dual channel digital output module with 2A (typ.) capability each, or a 2A (typ.) single channel safety digital output module. In the second scenario, the first shield output is connected to the supply of the second one.

• Based on IPS160HF single high-side switch
• Application board operating range from 12 to 33V/0 to 2.4A
• Extended voltage operating range (J1 open) up to 60V
• Status and diagnostic LEDs, 3KV galvanic isolation
• Supply rail reverse polarity protection
• Ready for safety digital output architecture
• EMC compliance with IEC61000-4-2, IEC61000-4-3, IEC61000-4-5
• Wide application development potential in STM32 Nucleo development environment
• Equipped with Arduino™ UNO R3 connectors
• CE certified

Huomautuksia

Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.