
Tarvitsetko enemmän?
Määrä | |
---|---|
1+ | 2,360 € |
10+ | 1,420 € |
25+ | 1,380 € |
50+ | 1,350 € |
100+ | 1,310 € |
500+ | 1,130 € |
Tuotetiedot
Tuotteen yleiskatsaus
The HCPL-4502-000E is a 1-channel 8-pin Diode-transistor Optocoupler uses an insulating layer between a LED and an integrated photodetector to provide electrical insulation between input and output. Separate connections for the photodiode bias and output-transistor collector increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the base-collector capacitance. It is designed for high speed TTL/TTL applications. A standard 16mA TTL sink current through the input LED will provide enough output current for 1 TTL load and a 5.6kΩ pull-up resistor. CTR for these devices is 19% minimum at IF=16mA. It is suitable for high voltage insulation, video signal isolation and line receivers.
- Open collector output
- 15kV/µs Minimum common mode transient immunity at VCM=1500V
- 630V Maximum working insulation voltage
- 0 to70°C Guaranteed performance from temperature range
- 1Mbps High speed
Sovellukset
Motor Drive & Control, Signal Processing, Power Management
Varoitukset
Market demand for this product has caused an extension in leadtimes. Delivery dates may fluctuate. Product exempt from discounts.
Tekniset tiedot
1 Channel
8Pins
3.75kV
20V
No SVHC (23-Jan-2024)
DIP
25mA
19%
-
Tekniset asiakirjat (1)
Vaihtoehdot osanumerolle HCPL-4502-000E
1 tuote löytyi
Lainsäädäntö ja ympäristöasiat
Maa, jossa viimeinen merkittävä valmistusvaihe on tehtyAlkuperämaa:Singapore
Maa, jossa viimeinen merkittävä valmistusvaihe on tehty
RoHS
RoHS
Tuotteen vaatimustenmukaisuustodistus