Low

ACPL-798J-000E - 

Optocoupler, Optically Isolated Amplifiers, 1 Channel, WSOIC, 16 Pins, 5 kV

BROADCOM LIMITED ACPL-798J-000E

Kuva on vain kuvaavaa tarkoitusta varten. Lue tuotekuvaus tarkempia tietoja varten.

Valmistajan osanumero:
ACPL-798J-000E
Tilauskoodi:
2455180
Tekninen tuotetietolomake:
(EN)
Näytä kaikki tekniset asiakirjat

Tuotetiedot

:
WSOIC
:
-
:
1 Channel
:
-
:
Cut Tape
:
-
:
5kV
:
16Pins
Löydä vastaavia tuotteita Voit etsiä vastaavia tuotteita valitsemalla ja muokkaamalla yllä olevia valintoja.

Tuotteen yleiskatsaus

The ACPL-798J-000E is a 1-channel 16-pin surface-mount optically isolated Sigma-Delta Modulator with LVDS clock and data interface. The 1-bit second-order sigma-delta modulator that oversamples an analogue input signal into a high speed data stream with galvanic isolation based on optical coupling technology. It operates from a 5V power supply with dynamic range of 82dB with an appropriate digital filter. The differential inputs of ±200mV (full scale ±320mV) are ideal for direct connection to shunt resistors or other low-level signal sources in applications such as motor phase current measurement. The analogue input is continuously sampled by means of sigma-delta over-sampling using external clock, coupled across the isolation barrier, which allows synchronous operation with any digital controller. The signal information is contained in the modulator data, as a density of ones with data rate up to 25MHz. The original signal information can be reconstructed with a digital filter.
  • 75dB Typical SNDR
  • 3.5mV/°C Maximum offset drift
  • ±1% Maximum gain error
  • ±200mV Linear range with single 5V supply
  • 25kV/µs Common-mode transient immunity

Sovellukset

Sensing & Instrumentation, Automation & Process Control, Test & Measurement